- Triple "Figure 8" shaped heatpipes offer twice the cooling of conventional heatpipe design.
- Aerodynamically designed ultra-slim 0.2 mm fins for minimised weight and reduced airflow resistance.
- Compatible with Intel socket 478/775 and AMD socket AM2/754/939/940.
- World-famous ultra-quiet fan operation - virtually inaudible with figures as low as 18 dB.
| Intel |
478 |
Celeron |
Supports all speeds |
| Celeron D |
| Pentium 4 |
| 775 |
Celeron D |
Supports all speeds |
| Pentium 4 |
| Pentium D |
| Core 2 Duo |
| Core 2 Quad |
| Core 2 Extreme |
| AMD |
AM2 |
Sempron |
Supports all speeds |
| Athlon 64 |
| Athlon 64 X2 |
| Athlon 64 FX |
| 754 |
Sempron |
Supports all speeds |
| Athlon 64 |
| 939 |
Athlon 64 |
Supports all speeds |
| Athlon 64 X2 |
| Athlon 64 FX |
| Opteron |
| Dual-Core Opteron |
| 940 |
Athlon 64 FX |
Supports all speeds |
| Opteron |
| Dual-Core Opteron |
|
| |
There must be no interfering components (e.g. PSU, VGA card) within 56mm distance from the center of the PSU. There must be no interfering components (e.g. ODD) within 45mm distance from the center of the CPU. Case chassis cover must be distanced at least 135mm away from the motherboard.
| Dimensions |
85(L) x 112(W) x 125(H) mm |
| Weight |
530g |
| Base Material |
Pure Copper |
| Dissipation Area |
3,698㎠ |
| Thermal Resistance |
0.12 ~ 0.16°C/W |
| Bearing Type |
2 Ball-Bearing |
| Speed |
1,350rpm ± 10 % ~ 2,600rpm ± 10 % |
| Noise Level |
18.0dBA ± 10% ~27.5dBA ± 10% |
| Common Components |
|
- Cooler (CNPS9500A LED)
- Thermal Grease
- Fan Speed Controller (FAN MATE 2)
- Double-sided Tape (for FAN MATE 2 attachment)
- Cable for Fan Mate 2
- User’s Manual (in English and Korean)
- Clip |
| |
| Components for Intel Socket 775 |
|
- Clip Lever A
- Clip Support for Socket 775
- Backplate for Socket 775
- Four(4) Clip Support Fixing Bolts for Socket 775 |
| |
| Component for AMD Socket AM2/754/939/940 |
|
| * Clip Lever B |
Cautionary Notes
The maximum weight for a cooler is specified as 450g for Intel Socket 775 and AMD Sockets
AM2/754/939/940. Special care should be taken when moving a computer equipped with a cooler that exceeds the specified weight limit. Zalman is not responsible for any damage that occurs when moving a computer.
Check the components list and condition of the product before installation. If any problem is found, contact your place of purchase to obtain a replacement
Excessive force exerted on the fan may damage the fan, resulting in damage to the system.
Do not ingest or make oral contact with the Thermal Grease. If ingested, get medical attention.
Disclaimer) Zalman Tech Co., Ltd. is not responsible for any damages due to external causes, including but not limited to, improper use, problems with electrical power, accident, neglect, alteration, repair, improper installation, or improper testing.
The computer system may automatically shut down when booting the computer after the system monitoring program outputs a warning stating that the CPU fan is rotating slowly. In such a case, fully turn the Speed Control Knob in the clockwise direction before rebooting to disable the ‘CPU Fan Detected’ option in BIOS, or set the CPU fan’s rotational speed to 1,350rpm or lower in the system monitoring program.
Zaman Tech Co., Ltd. is not responsible for any damages to the system and CPU resulting from overclocking.
This product was added to our catalog on Friday 24 October, 2008.
